FOS 100w
Version: 2010/08/13
20
3
Technical data
Optical interface
(optical receiver and transmitter for voice and data)
Optical fiber link
1 × SC/PC
Ethernet-WAN
100Base-BX /-LX /-FX
Fiber type
Single-mode Fiber; TX: 1310 nm, RX: 1550 nm
LAN interface
(Ethernet Router)
Ethernet LAN
4 × RJ45; Auto MDI / MDIX; Transparent Bridging mode
DHCP
static and dynamic IP address assignment
WLAN interface
Access Point
acc. to IEEE802.11b/g
802.11g Data rate
54, 48, 36, 24, 12, 9, 9 Mbps
802.11b Data rate
11, 5.5, 2, 1 Mbps
Safety
64- / 128-bit WEB; WPA-PSK, WPA2-PSK, WPA, WPA2
Telephone services
(analogue telephone interfaces)
Telephone sockets
2 × RJ11
Signalling
SIP
Voice Codecs
G.711
Supplementary services
3PTY; CLIP; CLIR; HOLD; CW etc.
Service quality & Security
Quality of service
Diffserv; Type of Service, Class of Service
Firewall
Network Address Translation (NAT); Port Forwarding
Management
Remote Management
SNMP-Management; Dynamic configuration via TFTP
Firmware Update
Remote and local Firmware Update
Powering through plug-in power supply module
Primary voltage (AC)
Operating voltage range
230 V ± 15%
Frequency range
50 Hz … 60 Hz
Current consumption
< 150 mA
Secondary voltage (DC)
Nominal voltage
12 V
Current consumption
< 1.2 A
Casing
Design version
Plastic casing with integrated display elements and physical
interfaces
Display elements
5 LEDs for status information
Dimensions
240.4 mm
×
160.4 mm
×
48.2 mm (W
×
D
×
H; without PI box)
Colour
signal white (RAL 9003) , jet black (RAL 9005)
Weight
ca. 0.5 kg
