EL-31_V2.1b_en.docx
April 7, 2019, ©
Elcon
, Switzerland
Page 27 / 29
5.3 Repair / Warranty
We have no influence on the correct and proper assembly and can only guarantee the com-
pleteness and flawless condition of the components. We guarantee that the components will
function in accordance with their characteristic values when not installed and that the tech-
nical data of the module will be adhered to when professionally processed in accordance with
the installation instructions and commissioned or connected and operated as prescribed. We
do not warrant or assume any liability for damages or consequential damages in connection
with this product. We reserve the right to repair, rectify, deliver spare parts or refund the pur-
chase price. Further claims are excluded.
The following criteria will not be repaired or are not covered by warranty:
-
if acidic solder, solder grease or acidic flux etc. was used for soldering.
-
if the kit has been improperly soldered, glued and assembled.
-
during modifications and repair attempts on the module.
-
in case of unauthorized modification of the module or the circuit.
-
in case of improper removal of components not provided for in the design, improper free wiring, etc.
-
Use of other components not originally part of the kit.
-
in the event of incorrect assembly and wiring, as well as the resulting consequential damage.
-
damage caused by non-observance of the operating instructions or the schematic and assembly diagram.
-
if the module is connected to an incorrect voltage or type of current or if the polarity is incorrect.
-
in the event of faulty operation or damage due to negligent handling or misuse.
-
defects caused by bridged fuses or the use of incorrect fuses.
In all cases the transport costs of the kit shall be borne by you.
