R
9
CALIBRATION
Calibration checks to ensure that the correct load is being applied to the dolly will be required periodically.
Elcometer can carry this out and a calibration certificate traceable to national standards can be issued, by
contacting Elcometer, your local Elcometer supplier, or visit www.elcometer.com.
6 TECHNICAL SPECIFICATION
GAUGE
Range:
0 MPa to 3.5 MPa (0 PSI to 500 PSI)
Accuracy:
±15% of reading
Height:
208 mm (8.2")
Diameter:
103 mm (4.1") including legs
Net Weight:
2 kg (4.4 lb)
Gross Weight: 5 kg (11 lb) (including case and accessories)
Material:
Body and barrel - Anodised aluminium
Feet and Belleville washers - Steel
TEST DOLLY
Diameter:
50.8 mm (2")
Material:
High-tensile aluminium
Adhesive:
Araldite, two-pack epoxy resin
