ELCOM Euro-50TE Mini, User Manual

Page: 20 / 84

20
Cash register characteristics
Usage and storage of paper ribbons
Conditions for the proper storage of thermal paper rolls supplied by Elcom s.r.o., with which the producer
guarantees the consistency of the printer for at least 5 years:
• room temperature of 18 to 25°C,
• relative air humidity of. 40 to 60% max,
• keep away from direct sunlight.
Among impacts limiting the consistency of the printer are:
• long exposure to temperatures over 40 °C,
• being kept in a damp or humid environment,
• contact with softening materials (stored in PVC folio), with solvents, mollifiers, glues, with carbon and
self-adhesive paper, direct sunlight.
When taping a report into an accounts book, only press tape at the end of the paper ribbon in order not
to damage the printed data. If proper storage conditions are not maintained or non-quality journal paper is
used, Elcom cannot guarantee the quality of printing.
If the red color stripe marking the ribbon end appears, change the paper ribbon immediately. Delay in chan-
ging the paper roll can damage the printer or possibly shorten its lifespan.
USING A MEMORY CARD
The slot for the memory card is located in the space for the cash register battery (see Fig. 2.8). The Euro-
50TE Mini cash register supports work with memory cards of the SD type up to a capacity of 2 GB (the
Elcom company does not guarantee functionality of the cash register with cards of the micro and mind SD
type). At present it is possible to use the memory card for the export and import PLU databases (see the
chapter „Export and Import“).
Warning: Open the battery cover only when the cash register is turned off.
Figure 2.8 – Installing an SD card into the cash register
Setting the display contrast :
At different light intensity it’s possible to set the contrast of the displayed characters on the operator display
of the cash register.
The contrast can be set in any cash register´s mode by pressing the  SHIFT and key  to increase the
contrast or  to decrease the intensity of the contrast. The set of contrast level will be in use after switching
OFF and ON again.