9
Inserting the SIM Card
Before you insert the SIM Card into your device, you must
deactivate the PIN code with a mobile phone. It is also rec-
ommended that the telephone answering machine and all addi-
tional functions of the telephone operator are deactivated.
Also make sure that your SIM card has credit and, if new,
verify that it is correctly activated by trying to send SMS
messages.
SMSB121TH works with prepaid SIM cards or both voice and data
subscription. However, having many inputs, it is possible that
the credit will quickly run out and this would cause the
normal operating logic of the device to be blocked. Therefore,
it is recommended to use SIM Card subscription, in particular
SIM DATA since they have a preferential channel for data
transmission, and also these are exempt from government con-
cession fees.
Insert the SIM card into the device slot with the contacts
facing downwards (see figure).
If you choose to use a prepaid SIM Card, the SMSB121TH has a
credit check function: we recommend that you activate it to
keep the remaining credit under control.
Start-up
B
efore turning on the device, make sure that you have made the wiring and fastened the support
base to the wall, and insert the SIM card into the special compartment.
Ignition
To turn on the SMSB121TH remote control, follow the procedure
below:
1.
Shift up the 2th switch on power supply connector (4)
2.
Shift up the
1
th switch on power supply connector (4)
Observe the sequence.
The
4
th
and 5
th switch
must
be
always ON.
Switch 3 must always be set to OFF (service only)
Shutdown
To turn on the SMSB121TH remote control, follow the procedure
below:
Shift up the 2th switch off power supply connector (4)
Shift up the 1th switch off power supply connector (4)
Observe the sequence.
The 4th and 5th switch must be always ON.
Switch 3 must always be set to OFF (service only)
3FF
micro
SIM CARD
3
3FF
micro
SIM CARD
3
3
4
1
2
3
4
5
ON
ON
ON
3
4
1
2
3
4
5
ON
ON
OFF
