(7) Tool
menu
Fig. 23. tool menu
a. Connect
: To connect with the hardware. The connect window is depicted in Fig. 24.
Microcontroller
: The device presented on the edit bar is one of the
EM78PXXX series. Users can also select others by clicking the downward
triangle icon on the right side of the edit bar.
Print port
: The system will search automatically the address of the print port,
which is already connected with the hardware. After the connection is
successful, DWTR will also diagnose the hardware right away.
b. Blank check
: To check whether the OTP is blank or not.
c. Verify
: To compare the contents of OTP memory against an open source file, and to
display the result on the output window.
d.. Compare
: To compare contents of the read window against the present source file,
and to display the result on the output window.
e. Check Status
: Read DWTR version, IC_ID (in EEPROM), OTP Read/Program
solution, EEPROM Read/Loading solution ,Jump connection test,Socket connection
test, Current detector and Voltage detector.
f. Find code:
To find a certain code in the active source or read window. The
dialog box is shown in Fig. 25.
g. Reset:
Reset DWTR and Read status.
h. Writer Test
: The dialog box is shown in Fig. 26.
To execute different combinations of the writer operations repeatedly.
i. Font
: Font setting. To set the font of source, read and output windows.
21
