ELABO G1-1 Operating Instructions Manual Download Page 115

Page: 115 / 135

115

12. INPUT/OUTPUT TEST STEPS

12.6 Load and execute test plans (Input/Output)

Prerequisite: See chapter 12.5.

Note:

The execution of test plans is possible in manual mode or in auto-

matic mode. The setting is made in the menu "Setup - Test plan mode".

See also chapter 10.4 - illustr.. 10.41.

Test plan mode - step:

The start of test-steps must be done by

user-input (eg, push button).

Test plan mode - auto:

Test-steps are running as sequence au-

tomatically.. Only if "error" an operator intervention is required.

Choose "test plan" in the main menu.

Choose "Load test plan" in the main "test plan".

Choose the desired test plan at the list. See also chapter 10.5.

It is possible to edit the loaded test plan on this place (insert or delete

parameter blocks).

12.6.1

Start /execute test plan (auto- mode)

Note:

Test-steps are running as sequence automatically.

Fig. 12.23: Execute test plan

Full-electronic G1-1 HV DC-Tester

Summary of Contents for G1-1








































































































































Search results

Summary of Contents for G1-1

Reviews:

Related manuals for G1-1

Brands by name

Popular brands

ELABO G1-1, Operating Instructions Manual

Search results

Summary of Contents for G1-1

Reviews:

Related manuals for G1-1

Brands by name

Popular brands