100
12. INPUT/OUTPUT TEST STEPS
12 OPTIONAL OUTPUTS / INPUTS
For the device can be ordered as an option, two additional interface cards
with only outputs or outputs and inputs. The installation of the optional
cards must be carried out by the manufacturer, because interventions
must be made in the hardware of the device. For update of a the tester
with this options, sent the device to ELABO.
The device can be equipped with both interface cards simultaneously. The
presence of the card must be defined in the menu Setup - device setup
(pass word protected).
12.1 Base settings Outputs/Inputs
The base settings includes for:
Digital
In-/Outputs the definition of a self-explanatory name.
Analog
In-/Outputs the definition of a self-explanatory name, the
unit (SI) and the final values (scale).
The base settings are made in the menu "Setup".
Fig. 12.1: Settings In-/Outputs
Full-electronic G1-1 HV DC-Tester
Summary of Contents for G1-1
Page 38: ...38 4 OPERATING MODES 4 2 2 Normal mode input step Full electronic G1 1 HV DC Tester...
Page 39: ...39 4 OPERATING MODES 4 2 3 Normal mode output step Full electronic G1 1 HV DC Tester...
Page 40: ...40 4 OPERATING MODES 4 2 4 Normal mode time step Full electronic G1 1 HV DC Tester...
Page 133: ...Expires 04 19 2016...
