26
Param
Gerät
Prüfung
Auswahl
Speichern
Leakage current tester 92-4A / 92-4D / 92-2E
MENU SYSTEM
4.5
Menu Set test parameters
In this menu the initial setting for the leakage current measurement is
carried out. Depending on the measurement configuration you have se-
lected, there maybe not all of the following parameters available or cannot
be edited.
Basic settings
- Chapter 4.5.1
Parameters to define the item under test.
Leakage current measuring
- Chapter 4.5.2
Parameters for leakage current measurement.
Select parameter block
- Chapter 4.5.3
Save parameter block
- Chapter 4.5.4
Erase parameter block
- Chapter 4.5.5
Illustr. 4.5: Menu - Set test parameters
Device
Test
Select
Save
Erase
