24
dicate on the data label.
Connecting the hood to the grid
Warning
: Before connecting the hood: switch off
the electricity supply and check that the supplied
voltage and frequency coincide with that indicated
on the appliance nameplate.
If the extractor hood has a plug, connect it to a pow-
er socket in line with applicable regulations, located
in an accessible area.
If the hood does not have a plug, connect it directly
to the electrical grid, protected by a separator device
accessible for disconnection, in line with local regu-
lations.
The connection to the electrical mains must be
made as follows: BLUE………………………..”N” NEUTRAL
BROWN……………………..”L” LIVE
GREEN AND YELLOW……
EARTH
If the terminals of the plug are unmarked or if you are
in any doubt consult a qualified electrician.
If it is not supplied fit a plug normalized in the cord
for the load showed on the rating plate.
USE OF THE HOOD – SAFETY
Warning
: The hood may stop working during an
electrostatic discharge (e. g. lightning). This involves
no risk of damage. Switch off the electricity supply to
the hood and reconnect after one minute.
This appliance can be used by children aged 8 years
and above and persons with reduced physical, sen-
sory or mental capabilities or lack of experience and
knowledge if they have been given supervision or in-
struction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
