- 4 -
INSTALLING THE BACKPLATE
STEP 1
PREPARING YOUR GRAPHICS CARD
EK-Vector Radeon VII Backplate is very simple to install, first complete
the installation of your EK-Vector Radeon VII Water Block according
to its installation manual. Using a Phillips head screwdriver remove
the 7 screws and their PVC washers which are marked below.
STEP 1
1
2
2
STEP 2
CUTTING THERMAL PADS
Your backplate is supplied with thermals pads that need to be cut into
smaller pieces in order to cover all VRM components. PLEASE REMOVE
THE PROTECTIVE STICKER FROM BOTH SIDES OF THE TERMINAL
PADS PRIOR TO INSTALLATION.
Replacement thermal pads:
1. Thermal PAD F 1.0mm - (120x16mm) - (EAN: 3830046996732)
2. Thermal PAD F 1.5mm - (120x16mm) - (EAN: 3830046996749)
STEP 2