- 5 -
HOW TO USE THE LEAK TESTER
STEP 1
Check that the tested system (Loop / Water Block / Distribution
Plate / Reservoir / ...) is sealed everywhere except for one free G1/4
port. Screw the Tube Connector to this G1 / 4 port.
STEP 1
G1/4 TUBE
CONNECTOR
STEP 2
Assemble the rest of the Leak Tester from the box and attach the
Leak Tester’s Flexible Tube to the G1/4 Tube Connector.
STEP 2
CONNECT THE FLEXIBLE TUBE
TO THE G1/4 TUBE CONNECTOR
