STEP 7(optional): MOUNTING EK-DCP PUMP AS A STANDALONE OPTION
Cont.1: Users can also mount pump onto mounting plate. In this case please use enclosed standoffs on both model of pump (EK-DCP 2.2 and EK-DCP 4.0).
Standoffs prevent overtightening mounting screws and bending/damaging plate.
Cont.2: Place pump as shown on picture below and use enclosed screws to attach and secure position of pump.
Cont.3: Lastly, position bracket and fasten it according to pump installation manual (with screws that come with your water pump). Use fittings or barbs to
prepare your pump for connection with other water cooling components.
STEP 8: OTHER INSTRUCTIONS
Please note that EKWB holds no responsibility of any kind if assembly is not made by instructions. This applies also for all
products that are not listed as compatible on web page. Users must by all means also consider instructions that are being made
for proper use of pump and other water cooling components provided by manufacturer(s).
HINT: Never let your pump dry running. If that happens for prolonged period of time you risk destroying bearing and rendering
pump useless.
REQUIRED MOUNTING SCREWS:
Standoffs
Outer
holes
are
for
EK
‐
DCP
4.0
All
disclosures,
notices
and
warranty
conditions
are
being
written
on
the
back
of
the
box.
Released
on
4
th
of
March,
2010
Use
Philips
screwdriver
to
tighten
M3x16
DIN7985
screws.
Inner
holes
are
for
EK
‐
DCP
2.2
4 x M4x12 DIN7985
4 x M4 PVC washer
4 x M4 nut
2 x M3x6 DIN7985
2 x M3 PVC washer
2 x M3 nut
2 x M3x16 DIN7985
