/ 30 /
FILLING THE SYSTEM FOR THE FIRST TIME
STEP 1
Preparing the cooling liquid.
The coolant comes in the concentrated form. In order to
prepare the cooling liquid, you must take a 100mL clear coolant
concentrate, which is enclosed with the kit, and mix it with 900mL
of distilled water.
Make sure you mix the mixture properly before pouring it into the
water cooling loop.
Store the remaining liquid into a PET bottle. Do not use any
food or beverage container!
STEP 2
Remove the top cover of your reservoir by unscrewing it in the
counter-clockwise direction.
It is recommended to protect the exposed hardware with a
few paper towels in case of a leak.
Take the pre-mixed coolant and pour it into the reservoir until the
coolant level is about 2 centimeters below the top.
For pouring the pre-mixed coolant into the reservoir, you may use
the enclosed 500mL filling bottle.
H
2
0
1
9
STEP 1
STEP 2