background image

- 12 -

Our products are warranted against defects of materials and quality 
for a period of 24 months, starting with the date of delivery to the 
end-user. During this period, products will be repaired or have parts 
replaced at our discretion, provided that 1) the product is returned 
to the agent from whom it was purchased; 2) the product has been 
purchased by the end-user and has not been used for commercial 
purposes; 3) the product has not been misused, handled carelessly, 
or used in a manner other than the way described in the instructions 
manual. This warranty does not confer rights other than those 
expressly set out above and does not cover any claims for 
consequential loss or damage. This warranty is offered as an extra 
benefit and does not affect your statutory rights as a consumer. This 
warranty is voided if the product comes in contact with aggressive 
UV additives or other improper liquids. EK water blocks are sealed 
with a warranty-voiding circular label, proving the water block has 
withstood a pressure leak test. Removing the label will void the 
leak-free guarantee, but not the guarantee on the product itself. 
Any other RMA issues can be reported to EK Customer Support at 

www.ekwb.com/support

 for further analysis.

WARRANTY

Summary of Contents for 3831109901083














Reviews: