- 9 -
CUTTING AND PLACING THERMAL PADS
Your monoblock comes with thermal pads that need to be trimmed
to fit the voltage regulation area (MOSFET) on the motherboard’s
circuit board.
16
16
Thermal Pad F 1.0mm - (120x16mm)
Thermal Pad F 2.0mm - (120x16mm)
120
120
Thermal Pad
F 1.0mm
1 mm
2 mm
Thermal Pad
F 2.0mm
Place larger strips of thermal pads over the marked area and make sure
all MOSFET and inductor chips are covered, as shown in the picture.
CAUTION: Remove the protective foil from both sides of a
thermal pad before installation.
