- 11 -
INSTALLATION OF COOLING SOLUTION TO THE MOTHERBOARD
STEP 1
Carefully align your EK-QuantumX Delta TEC water block over
pre-installed mounting mechanism with the already installed
CPU. Be careful not to remove the pre-installed rubber inserts
from the water block mounting holes.
CAUTION: The protective sticker must be removed from the
cold plate.
IMPORTANT:
Make sure the protrusion on the insulation guard is aligned with the
socket load lever. Not doing so may result in operation malfunctions
or even hardware damage.
Pay attention to the shape of insulation – it shouldn’t be twisted or
crooked when installed.
STEP 1
