Host pairing Clear button:
BT5701 host memory paired with it last slave address code, only to find it after power memory
pairing, the host will gi ve up the memory, re-search for new slaves.
Power Supply:
►
Built-in lithium battery: Do not insert MINI USB external power supply, the battery-powered switch to the serial port header
struck the opposite side, you can use the built -in lithium battery.
►
MINI USB external power supply: the battery-powered switch to the serial port side of the
power supply (computer USB port or 220V power ad apter available), and external
power adapter from an external power supply work. External power supply, if the battery switches
to the opposite side of
the serial port header, it still consumes internal battery power, but this time both the external power supply to charge the battery.
►
The built-in lithium battery: either switches
to battery which side, insert MINI USB external power supply, will be for the
built- in lithium battery, the internal charging circuitry to manage charging process to prevent overcharging.
B
►
Slave: pairing before connecting a flash, probably a second flash five times, after mating connector lit.
►
Host: In the absence of memory from the machine information in the case, the pairing before
times for approximately one second, on the memory pairing
slow flash, flash once about one second. After pairing indicator light long bright.
To Set Up and Use:
Use:
►
The purpose of using BT5701 is to replace the original serial connection, but how to substitute,
of products before they should have a clear plan. The following are typical of several BT5701 products use.
BT5701 from the machine and the Bluetooth notebook computer, USB Bluetooth adapter,
connection of main equipment, it is a way of using the most
equipment, wait till the main equipment to find the file, main equipment for BT5701 from
the machine, send pairing request
factory default pairing password is 0000),Paired connection is
from the master device, and in the main equipment to enter the correct password authentication
completed, the system of Bluetooth master device is
assigned a Bluetooth virtual serial port number for the Bluetooth connection, later application running in the main on the
device only needs to be set up to use the serial number, and the BT5701 serial communication, the connection and
Bluetooth adapter serial device for serial communication.
►
Using BT5701 from the machine and the BT5701 host pairs.
The
master and slave respectively in the original serial cable
ports
on the host, power will automatically search from the m
matching connection. After the success of the link, the master and slave Bluetooth status indicator is no longer flashing, into a long
bright state. The master and slave connection, even if the two different baud
rates
can also be mutual
The master-slave pairs without setting, two modules are power can then
w w w . e k t
2
. c o m
w w w . e k t
2
. c o m
slave. Click the Clear button
does not produce any results.
Slave pairing Clear button is just a decoration, press down
head,insert MINI USB external
power indicator will light up all the
luetooth Status Indicator:
connecting flash, flash four
information from the machine after pairing before connecting
with households in the purchase
Bluetooth PDA and Bluetooth
common BT5071.The machine is installed in the serial port
BT5701 pairs from machinen
connects two serial
achine and from the machine to complete the
transmission of data.
away to disconnect, the master and slave. Bluetooth status indicator will be restored to the state before the flashing status is not
connected when they come, will automatically revert to the connection state.
►
BT5701 host connection device using Bluetooth from: currently on the market the common
printer, internal general use Bluetooth from the machine, use the
passkey, close together connected.
serial communication. If the host and slave is too far
Bluetooth GPS and Bluetooth
AT command will host set to and from the machine the same
AT command set:
Connect the BT5701 to the serial device before, should check equipment specifications, to obtain
parameters, and then the adapter necessary settings on the computer, so that the parameters of serial communication parameters
and equipment serial port adapter agreement. Otherwise, may be a communication failure.
the default serial communication
