Operating Manual
MAN_EL-1000-4GM
Version:
2.6.1
/ 01.02.2021
Authorized by:
T.W.
Page 32 of 77
device will send email messages if a configured alarm is triggered. If required set up
authentication credentials according to your needs. For this you have to select the checkbox
“Authentication needed:” and define a SMTP password. Optionally, the encryption can be
activated by selecting the checkbox. Subsequently, the port and the type of encryption can
be defined.
The setting will be confirmed by clicking the Create button.
With the Button “Send test email” you can verify if the email setup works before the alarm
receiver is created.
In the lower part of the screen, the alarm receivers can be assigned to previously added alarm
triggers.
Figure 61: Adding an alarm receiver
5.4.3
Port statistics
The port statistics screen (Figure 72) provides information about the data traffic on the individual
ports, which is helpful for diagnosis purposes in case of network problems. The complete number of
sent, received, faulty, and colliding packets is displayed. Furthermore, the size of the individual
packets is recorded statistically up to a variety of threshold values.