manualshive.com logo in svg

Ekra E1, System Manual

Share
Download
Ekra E1 System Manual Download Page 15

Chapter 1

Introduction

1-8

E1 Semi-automatic screen printer

System Manual

EKRA / Doku Eisermann 01_EINFUEHRUNG_PDF.FM
30.8.02

Warranty and liability

Our "General Terms and Conditions of Sale and Delivery" shall apply. They 
shall be available to the owner upon conclusion of the contract at the latest. 
Only EKRA Eduard Kraft GmbH is permitted to issue promises of warranty.
If defects or damage are repaired by the customer or by a third party with-
out the prior agreement of EKRA Eduard Kraft GmbH, the latter shall refuse 
all liability for consequential damage and cannot acknowledge any further 
warranty claims.
Warranty and liability claims for injury and damage shall be excluded if they 
are due to one or more of the following:
•

Incorrect use of the machine.

•

Incorrect assembly, commissioning, operation and maintenance of the 
machine.

•

Operation of the machine with faulty safety devices, or incorrectly 
attached or non-functional safety and protective devices.

•

Failure to observe the information in the user’s manual concerning 
transport, storage, assembly, commissioning, operation, maintenance 
and set-up of the machine.

•

Arbitrary modifications to the construction of the machine.

•

Arbitrary modification of programs which affect machine control.

•

Insufficient monitoring of device components which are subject to wear.

•

Incorrectly performed repairs.

•

Severe damage caused by foreign bodies and force majeure.

Summary of Contents for E1

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands