Kapitel 1
Introduction
1-12
©
EuroDok
01_Einfuehrung.fm
Druck 23.10.08
E1-II semiautomatic screen printer
System Manual
fon
+4
9 (0
) 625
2 -
6
9
5
0
1
fa
x
+4
9 (0
) 625
2 -
6
9
5
0
3
m
ai
l@
eu
ro
do
k.de
Eu
ro
Do
k G
m
b
H
D
a
rm
st
ädt
e
r St
raße
67
D-64
646
Heppe
nh
e
im
1.12.11 Maintenance and repair, troubleshooting
•
The intervals specified for the prescribed maintenance and repair
work must be observed.
•
The operating personnel must be informed before any maintenance
and repair work is started.
•
Before commencing maintenance, inspection and repair work, care
must be taken to ensure that the machine is de-energised and that
the main switch cannot be switched on again inadvertently.
A warning sign must be put in place to prevent the machine from
being started by a third party.
•
When replacing large assemblies, carefully attach and secure them
to the lifting gear.
•
Check loosened screw connections to ensure that they are secure.
•
Once the maintenance work has been completed, check to ensure
that the safety devices are fitted and are functioning correctly.
1.12.12 Structural modifications to the machine
•
No modifications should be made and no additional devices attached
to the machine without the prior consent of the manufacturer.
•
All modifications require written confirmation from EKRA Automatis-
ierungssysteme GmbH.
•
Faulty or damaged device components must be changed immedi-
ately.
•
Only genuine spare and wearing parts should be used. The design
and construction of components from other manufacturers may not
be able to satisfy the stress and safety requirements of the machine.
1.12.13 Cleaning the machine and disposal
•
Used materials must be handled and disposed of correctly. This par-
ticularly applies to lubricants, adhesives and solder pastes.
Solder pastes and adhesives which can no longer be used must be
returned to the manufacturer. Lubricants and residues of pastes and
creams must be disposed of as hazardous waste.
•
If pastes or adhesives containing solvents are used, the owner of the
machine must ensure that sufficient ventilation is provided. Further-
more, the concentration of vapours containing solvents must be con-
tinually monitored in order to avoid situations which are detrimental to
the health of personnel.
•
Cloths soaked in detergent are flammable! Observe the manufac-
turer’s instructions.
•
The national guidelines must be observed when disposing of waste
materials.
