Kapitel 1
Introduction
1-9
©
EuroDok
01_Einfuehrung.fm
Druck 23.10.08
E1-II semiautomatic screen printer
System Manual
fon
+4
9 (0
) 625
2 -
6
9
5
0
1
fa
x
+4
9 (0
) 625
2 -
6
9
5
0
3
m
ai
l@
eu
ro
do
k.de
Eu
ro
Do
k G
m
b
H
D
a
rm
st
ädt
e
r St
raße
67
D-64
646
Heppe
nh
e
im
Release emergency stop
After the Emergency Off function has been activated, push the green but-
ton under the keypad.
Safety switches and locks
The machine uses hardware and software safety switches as well as me-
chanical and pneumatic locks to prevent injuries caused by printer com-
ponents during printing.
•
When actuated, hardware safety switches interrupt the supply of
power to the printer motors.
•
When triggered, software safety switches stop all moving parts.
•
Mechanical locks are locked and released manually.
1.12.3 Using safety devices
The following section describes where safety switches and locks are
used.
•
Cover
A hardware safety switch is fitted at the rear of the cover. The soft-
ware safety switches are activated when the cover is closed. The
printer can only be used when the cover is closed. Opening the cover
during a printing process triggers an emergency stop.
•
Enclosures
The front and rear enclosures are protected from unauthorised open-
ing either by a switch gear cabinet lock or by being screwed in place.
DANGER!
Dangerous electric voltage!
The operator must not disable any of the safety devices.
The printer must never be operated without the enclosures.
