Kapitel 1
Introduction
1-8
©
EuroDok
01_Einfuehrung.fm
Druck 23.10.08
E1-II semiautomatic screen printer
System Manual
fon
+4
9 (0
) 625
2 -
6
9
5
0
1
fa
x
+4
9 (0
) 625
2 -
6
9
5
0
3
m
ai
l@
eu
ro
do
k.de
Eu
ro
Do
k G
m
b
H
D
a
rm
st
ädt
e
r St
raße
67
D-64
646
Heppe
nh
e
im
1.11
Warranty and liability
On principle, the legal provisions and the provisions of the VDMA (Ger-
man Engineering Federation) are valid for sale, supply and warranty.
If there are individual agreements made, they are antecedent.
Only EKRA Automatisierungssysteme GmbH is permitted to issue prom-
ises of warranty.
If defects or damage are repaired by the customer or by a third party with-
out the prior agreement of EKRA Automatisierungssysteme GmbH, the
latter shall refuse all liability for consequential damage and cannot ac-
knowledge any further warranty claims.
Warranty and liability claims for injury and damage shall be excluded if
they are due to one or more of the following:
•
Incorrect use of the machine.
•
Incorrect assembly, commissioning, operation and maintenance of
the machine.
•
Operation of the machine with faulty safety devices, or incorrectly
attached or non-functional safety and protective devices.
•
Failure to observe the information in the user’s manual concerning
transport, storage, assembly, commissioning, operation, mainte-
nance and set-up of the machine.
•
Arbitrary modifications to the construction of the machine.
•
Arbitrary modification of programs which affect machine control.
•
Insufficient monitoring of device components which are subject to
wear.
•
Incorrectly performed repairs.
•
Severe damage caused by foreign bodies and force majeure.
1.12
Safety devices
It is imperative that all operating personnel and, where applicable, service
personnel observe these sections.
1.12.1 Organisational measures
All fitted safety devices must be inspected regularly.
1.12.2 Safety devices
The machine is equipped with the following safety devices:
Emergency-stop switches
Emergency-stop switches interrupt the supply of power to the printer. An
emergency-stop switch is fitted. It is located at the front on the left-hand
side of the printer frame.
