EkoTek Pager
Set RX on charge / Set Charge no RX
When using a charging rack for charging the pager the option exists
to still receive alerts when on charge.
To access the
Set RX on Charge
/
Set Charge no RX
function,
press
X
the button to display the options screen.
**> Options <**
Set 12 Hour Mode
Enable Powersave
Power Off
Press the
X
button to select
Options
. Move the pointers to
Set RX
on Charge
or
Set Charge no RX
(display depends on current
setting. i.e. if the display offers ‘Set Charge no Rx’ the current
setting is Rx on charge) by pressing the
T
button and select using
the
X
button to toggle between settings
Display
Auto-delete
Alert
**> Set Charge no RX <**
Select by pressing the
X
button and the pointers will change to
question marks. Press the
X
button again to confirm the selection.
Changing the Battery
The pager displays the battery condition ( ) in the top line of the
display. The black bar indicates the level of charge.
When the battery is near the end of its operating life, the EkoTek
pager is programmed to provide a visual, audio and vibrate alert
warning. The normal audible beep alert will change to a different
tone and the
Replace Battery
warning will be displayed on the
standby screen:
Part No. 9261-8275 Issue 3.0
34
