EkoTek Pager
Setting the Message Display Options
Your EkoTek pager is equipped with display options and these may
be set according to your personal requirements. To change the
message display options, press the
X
button from the standby
screen. The options screen will now be displayed and select
‘Options’
by pressing the
X
button:
**> Options <**
Set 12 Hour Mode
Enable Powersave
Power Off
Move the pointers to
Display
by pressing the
T
button and select
this item by pressing the
X
button:
**> Display
<**
Auto-delete
Alert
Set RX on Charge
The following screen will be displayed:
Font
2
Backlight
On
Display Timeout
16s
Contrast
16
The selected item will flash. To select the next item, press the
X
button. Each press of the
X
button will advance the selection to the
next menu item. When the item you wish to change is flashing,
press the
S
or
T
buttons to change its value.
Part No. 9261-8275 Issue 3.0
31
