EKOM DK50 4x2VT/M, User Manual

Page: 49 / 60

PRODUCT MAINTENANCE
04/2022 49 NP-DK50-Nx2VTM-AD-EN-6_04-2022

Turn off the compressor.

Check the pressure in the dryer.

If the dryer chambers are under pressure,
proceed in accordance with Chapter
18.13.

Unscrew the 8 screws (1).

Disassemble the outlet panel (2) on which
the filters (3) are mounted.

Unscrew the dirty filters (3) and replace
with new filters.

Check the seal (4) on the bottom of the
outlet module and replace if necessary.

Reverse the procedure to reassemble.

Switch on the compressor.

Check for any dryer leaks.
Fig. 27: Replacement of internal filters
18.15. Replacement of cassettes with
adsorbent media
In normal operation, the replacement of the
cassettes with adsorbent media must be
performed at the defined interval.

Turn off the compressor.

Check the pressure in the dryer.

If the dryer chambers are under pressure,
proceed in accordance with Chapter 18.13.

Unscrew the 8 screws (1).

Remove the outlet panel (2).

Pull out and replace the cassettes (3) with
new parts.

Check the seal (4) on the bottom of the
outlet module and replace if necessary.

Reverse the procedure to reassemble.

Switch on the compressor.

Check for any dryer leaks.
Fig. 28: Replacement of cassettes with adsorbent media