EKOM DK50 2V/50/M, User Manual

Page: 57 / 220

AD DRYER
03/2022 57 NP-DK50 2V 50, 2x2V 110-AD-A-1_03-2022
19.4. Setting the drying mode during commissioning
It is recommended to set the air-drying mode during commissioning. These settings are changed
in the service menu in the SERVICE SETUP section. Access to the service menu is protected by a
code.
The drying mode is set based on the expected pressure range in which the device will operate and
the version of the compressor (with or without a cabinet).

compressor without a cabinet t
O
< 25 ̊C - set to ECONOMY mode

compressor without a cabinet t
O
= 25 ̊C - 30 ̊C - set to STANDARD mode

compressor without a cabinet t
O
> 30 ̊C - set to ENHANCED mode

compressor in cabinet - set to ENHANCED mode
t
O
- ambient temperature
20. MAIN SCREENS
The home screen opens once the user interface language and drying mode are set. There are 4
main screens accessed from the home screen.
The arrows at the bottom of the screen are used to navigate between the individual screens.
Adjustment of the dryer pressure
version
Adjustment of the dryer mode
Reset and adjustment of service
intervals, reviewing service and alarm
messages