EKOM DK50 2V/50/M, User Manual

Page: 56 / 220

AD DRYER
NP-DK50 2V 50, 2x2V 110-AD-A-1_03-2022 56 03/2022
max max
0
Symbol for chamber pre-filling
– equalisation of pressure in chambers.
19.2. Initial language settings for the user interface
The option to select a language appears when the program is first launched. The service
technician selects the given language during installation based on the geographic location of the
dryer installation. The program saves and remembers this setting. The option does not appear
when the program is restarted.
LANGUAGE SETUP
CZ SK
GER UK
RUS
HUN
FR
ADSORPTION DRYER
IS ON


RUN
E N T E R
CONFIRM THE
LANGUAGE:
CZECH
LANGUAGE SETUP
19.3. Setting the date and time during commissioning
It is recommended to set the date and time during commissioning. These settings are changed
in the service menu in the SETUP section. Access to the service menu is protected by a code
(1992). In SETUP you have to tap down arrow to set date and time. In the same way, it is
possible to reset the user interface language via LANGUAGE SETUP.
Indication the device is operating
Indication of an alarm state
(on until the alarm state no longer
exists)