EKOM ASPINA DO M, User Manual

Page: 23 / 196

PRODUCT MAINTENANCE
12/2021 23 NP-DO M-39_12-2021
PRODUCT MAINTENANCE
MAINTENANCE, CLEANING AND DISINFECTION
The operating entity is obliged to ensure that all tests of the equipment are
carried out repeatedly at least once within every 24 months (EN 62353) or in
intervals as specified by the applicable national legal regulations. A report must
be prepared on the results of the tests (e.g.: according to EN 62353, Annex G),
including the measurement methods used..
The device has been designed and manufactured to keep its maintenance to a minimum. For correct
and reliable operation perform the following operations.
Risk of servicing by persons without required qualification.
Repair works exceeding the scope of a general maintenance may only be carried
out by a qualified specialist or by the maufacturer’s customer service.
Use only spare parts and accessories permitted by the maufacturer.
Risk of electric shock.
Before making any maintenance, repair or cleaning, it is unavoidable to
disconnect the equipment from the network (unplug).
Burn hazard.
Allow the equipment to cool down before maintenance and service!
Reconnect the grounding lead if removed during service work to its previous
location once the work is complete.
Biohazard warning.
During the contact with the internal parts of aspirator including preparation phase
for suction cannulas, always wear EC marked personal protective equipment
(PPE).
Empty the separation vessel and clean the equipment before any maintenance or
service.