Ekol Clarity 5 – INSTALLATION AND OPERATING INSTRUCTIONS.
INTRODUCTION
SAFETY
Safety is the most important consideration when using and installing your stove. If not installed and used correctly,
a house fire could result. Installation must comply with relevant national and local Building Regulations and fire
safety standards.
IN THE EVENT OF CHIMNEY FIRE, EVACUATE THE PROPERTY AND CALL THE EMERGENCY
SERVICES.
Your stove will be heavy and care needs to be taken when lifting - 2 people will normally be required to lift.
UNPACKING
Your stove will have several of its components stored inside the stove itself for transportation.
Do NOT drag the stove on its legs – it must be carefully lifted into place.
The flue spigot can also be bolted to the flue outlet – the stove has two options for flue outlet – one on the top and
one at the rear. - Most people use the top outlet but depending on where you intend to position the stove in relation
to your chimney, you may wish to use the rear outlet – in this case, remove the blanking plate at the rear and secure
into the top outlet instead.
Inside the stove you will find a glove which must be used when opening the door or when adjusting air vents when
the fire is hot.
INSTALLATION
Installation of your stove must comply with relevant local and national Building Regulations and fire safety
standards.
