EKKO EP18LI Series, Manual

Page: 15 / 27

12
8.4 Battery capacity indicator
The stacker battery capacity indicator has electricity capacity display function.
8.5 Handling stacking operation
1). How to transport the goods pile on weight
Will forklift drive to the front of the items which need to carry slowly , make fork parallel to
the ground, lifting the fork to height, it can be inserted into the freight insert goods fork and
move forward slowly, wen the goods completely inserted into the goods after parking and
stepping on the brakes, manipulating ascend handle, the heavy lifting to a certain height,
make the door frame lean back, slowly astern, don't touch the adjacent goods, when weight
completely left the heap of goods, reduce the goods to the right position, then walking for
handling.
2). The weight on the heap of goods
Will weight low, lean back door frame, to storage goods moving close to the pile of
deceleration, when determining forklift with pile goods into a linear state, stepping on the
brakes slowly adjust the door frame Angle to the vertical state, increase the weight will be
slightly more than goods pile height, and then slowly driving forklift driving forward to pile
top stop. Heap controls control lever slowly, once handling stacked drags the weight, the
goods fork to the hollow position, from the weight of the goods fork, make sure barrier-free
backward position, can retreat. After goods fork out weight reduce goods fork, door frame
round of the reentry after handling operation.