EKF PC7-FESTIVAL, User Manual

Page: 82 / 108

User Guide • PC7-FESTIVAL • CompactPCI® PlusIO CPU Board
Connectors
Caution: Some of the internal connectors provide operating voltage (3.3V, 5V and 12V) to devices
inside the system chassis, such as internal peripherals. Not all of these connectors are short circuit
protected. Do not use these internal connectors for powering devices external to the computer
chassis. A fault in the load presented by the external devices could cause damage to the board,
the interconnecting cable and the external devices themselves.
Front Panel Connectors
The basic PC7-FESTIVAL front panel connectors are comprised of each two DisplayPort, USB3
Type-A and RJ45 Ethernet jacks. If low profile mezzanine modules are employed, one or two
Type-C receptacles may be available for front I/O in addition. Documentation on the Type-C
connectors is not provided in this manual - please refer to the particular mezzanine module in use.
For 8HP/12HP front panel width assemblies together with a side card e.g. PCZ-NVM please refer
to the particular side card documentation.
© EKF - 82 - ekf.com