User Guide CC9-SAMBA •
CompactPCI®
Pentium M CPU Board
© EKF -6- ekf.com
CC9-SAMBA Features
Feature Summary
Feature Summary CC9-SAMBA
Form Factor
Single size
CompactPCI
style Eurocard (160x100mm
2
), front panel width 4HP (20.3mm)
Processor
Designed for Intel® Pentium® M Micro FC-BGA 479 processors (0.13 Banias, 0.09 Dothan),
maximum junction temperature 100°C
•
CC9-1: 600MHz ULV Celeron® M, 512KB L2 cache, 7W
•
CC9-2: 1.0GHz ULV Celeron® M (Dothan 373), 512KB L2 cache, 5W
•
CC9-3: 1.4GHz LV Pentium® M (Dothan 738), 2MB L2 cache, 10W
•
CC9-5: 1.8GHz Pentium® M (Dothan 745), 2MB L2 cache, 21W
•
CC5-6: 2.0GHz Pentium® M (Dothan 755), 2MB L2 cache, 21W
Chipset
Intel® i855 chipset consisting of:
•
82855GME Graphics/Memory Controller Hub (GMCH)
•
82801D I/O Controller Hub (ICH4)
•
82802 Compatible Firmware Hub (FWH)
Memory
200-pin SO-DIMM socket (notebook style module), PC2100/2700 DDR266/333-SDRAM, 1GB
maximum
Video I/O
Analog monitor and digital flat-panel display support by DVI-I connector (front panel), up to
2048x1536 pixel 16M colours @75Hz refresh rate (analog), up to 1600 x 1200 pixel 16M
colours @60Hz (digital), incorporates PanelLink Digital technology (Silicon Image).
•
Front panel option: D-Sub (female HD15) VGA connector available, replaces DVI-I
connector
•
Rear I/O option: Analog video across J2/P2 (CCR-RIO rear I/O transition module)
USB I/O
All ports over-current protected, data transfer rate of up to 480Mbps, conforming to USB2.0
•
USB port 1: Type A connector (front panel)
•
USB port 2: Type A connector (front panel)
•
USB ports 3/4: J2/P2 Rear I/O option (CCR-RIO rear I/O transition module)
•
USB ports 4/6: Expansion interface option (CCA-LAMBADA/CCB-BOSSANOVA
mezzanine companion board)
Ethernet I/O
•
Standard 10/100/1000Mbps Gigabit Ethernet controller 82541ER, accessible via RJ45
jack from the front panel or as an option across J2/P2 with attached CCR-RIO rear I/O
transition module
•
Jumbo Frame support up to 16KB
•
Option 82541PI Gigabit Ethernet controller (replaces 82541ER), Virtual LAN support,
IEEE 802.1Q VLAN tag insertion and stripping and packet filtering for up to 4096
VLAN tags
•
Option 10/100 Ethernet (secondary LAN port), accessible via expansion connector LCI
(LAN Connect Interface ICH4), requires 82562 PHY on expansion board (CCB-
BOSSANOVA)
Mezzanine I/O
•
On-board LPC/USB/AC97 Super-I/O, USB and audio expansion interface connector
•
Suitable CCA-LAMBADA/CCB-BOSSANOVA mezzanine companion boards available
•
On-board LCI (LAN Connect Interface) connector for an additional Ethernet port
(suitable mezzanine companion board CCB-BOSSANOVA)
IDE/ATA
•
Ultra ATA/100 connector (Secondary IDE), handover to CCA-LAMBADA/CCB-
BOSSANOVA mezzanine expansion board with optional on-board 2.5-inch hard disk
drive or external device
•
CompactFlash socket for a CFA ATA memory card or Microdrive® (Secondary IDE)
•
Option 1.8-inch on-board hard disk module (Secondary IDE), replaces CompactFlash
facility
•
J2/P2 Rear I/O option: Primary IDE accessible from CCR-RIO rear I/O transition module
CCR-RIO
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com