en
│
5
□
ekey lock radio module
:
-
Module knob
-
Radio emitting module
-
Short antenna (41 mm)
-
RFID card set (activation, mounting, battery replacement)
-
Two CR2 batteries
-
Battery replacement clamp
-
Self-tapping fillister head screw
□
Mechanical knob with permanently assembled cylinder and fixing
screw
□
Operating instructions
□
Additional mandatory system components:
-
Registration unit
-
Control panel
□
Optional: Compatible accessories:
-
ekey lock long antenna
-
ekey lock wireless transponder
;
-
ekey lock e-opener
-
Power supply
-
Connecting cable
NOTICE
Ensure that the RFID cards are stored in a safe place. You need the RFID
cards supplied with the product to remove the knobs and the cylinder or
to enroll new transponders. If you lose these cards, you will not be able to
remove the knobs and the cylinder without causing irreparable damage.
This product is an accessory for a finger scan or pin code access control
system. It is integrated into the system. The system is comprised of radio
modules, a mechanical knob with permanently assembled cylinder, a
registration unit, and a control panel.
The access control system reads the features of the finger lines or the pin
codes entered, compares them to the stored fingerprint or reference code,
and activates the mechanical knob in order to unlock and open the door.
The system is primarily designed for opening house doors, apartment
doors, garage doors, and office doors in homes, businesses, and industrial
areas.
Scope of
delivery
Proper use
and area of
application
