- 6 -
PLACING THE BLOCK ON TO MOTHERBOARD
Place EK-Quantum Momentum ROG Rampage VI Encore series
water block to the motherboard or vice versa (as shown on the
photo). Make sure that mounting holes are aligned.
ATTACHING BLOCK ON THE MOTHERBOARD
STEP 1
Prior to fastening the screws please make sure the mounting holes
on the motherboard’s circuit board are aligned with the water block.
STEP 2 (CPU part)
Carefully tighten all the marked screws carefully using 2.5 mm Allen
Key. Do not use excessive force.
STEP 2
CPU Screw
