12
Chapter 1 Introduction
1-4. Controls and Functions
Monitor
Adjustment menu
*1
14
7
3
1
4
5
6
8
9
10
13
12
11
2
1. Operation switches
Displays the menu. Follow the guide to perform the desired operations.
2. switch
• Turns the power on or off.
• Indicates the monitor’s operation status.
Green: Operating, Orange: Power saving mode, Off: Main power/power off
3. Presence Sensor
Detects the movement of a person in front of the monitor.
4. Integrated Front Sensor
(slide type)
Used for calibration and Grayscale Check.
5. Ambient Light Sensor
Measures the environmental illumination.
6. USB downstream port
Connects a peripheral USB device.
7. USB upstream port
Connects the USB cable to use the software that needs USB connection, or to use
USB Hub function.
8. Power connector
Used to connect the AC adapter power cable.
9. Input signal connector
DVI-D connector
10. Input signal connector
DisplayPort connector
11. USB downstream port
Connects a peripheral USB device.
12. Stand
Used to adjust the height and angle of the monitor screen.
13. Security lock slot
Complies with Kensington’s MicroSaver security system.
14. Cable holder
Covers the monitor cables.
*1 For instructions for use, refer to the Installation Manual (on the CD-ROM).
AC adapter (PSA-073)
2
1
3
4
1. Power cord holder
attachment hole
Used to attach the power cord holder.
2. Power connector
Connects the power cord.
3. Main power switch
Turns the main power on or off.
4. Power cable
Connects with the power connector on the monitor.
