17
Chapter3SettingMonitor
3-6. Enabling/Disabling DC5V Output
This function allows you to enable/disable the DC5V output. Normally, turn it off during use.
Procedure
1. Touch to turn off the monitor.
2. While holding down the
switch at the far left, touch for at least two seconds to turn on the
monitor.
The “Optional Settings” menu appears.
3. Choose “DC5V Output” from “Optional Settings”, and choose
.
4. Select “On” or “Off” with
or
, and choose
.
5. Select “Finish” with
or
.
6. Choose
.
The “Optional Settings” menu is closed.
3-7. Return To Default Setting
There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and All
Reset for resetting all settings to the defaults.
Attention
• After resetting, you cannot undo the operation.
Note
• Regarding the default setting, see
“7-6. Main Default Settings” (page 33)
.
●
To reset the color adjustments
This function only resets the color adjustment value for the currently selected mode to the default settings.
Procedure
1. Choose “Color” from the Adjustment menu, and choose
.
2. Choose “Color Reset” from “Color”, and choose
.
3. Select “Execute” with
or
.
4. Choose
.
The color adjustments revert to the default settings.
●
To reset all settings
This function resets all adjustments to the default settings (except the “Input” and “Optional Settings” menus).
Procedure
1. Choose “Tools” from the Adjustment menu, and choose
.
2. Choose “All Reset” from “Tools”, and choose
.
3. Select “Execute” with
or
.
4. Choose
.
All settings excluding the “Input” and “Optional Settings” menus are reset to the default settings.
