24
Chapter 5 Configuring Monitor Settings
5-12. Setting Whether to Display / Hide the EIZO Logo
You can select whether to display or hide the EIZO logo when the monitor starts.
Procedure
1.
Touch
to turn off the monitor.
2. While touching the leftmost switch ( ), touch for more than two seconds to turn on the
monitor.
3. Select “On-Screen Logo” in “Administrator Settings”, then select .
4. Select “On” or “Off”, then select .
5. Select “Apply”, and then select .
5-13. Viewing the Monitor Information
View information related to the input signals that are currently displayed and the monitor.
Procedure
1. Select “Information” from the Setting menu, then select .
Input signal information, model name, serial number, firmware version, and usage time are displayed.
The asset tag number is only displayed when it has been set using RadiCS / RadiCS LE.
Example:
Attention
•
The usage time may not be "0" at the time of your purchase because inspections and other processes had
been carried out on the monitor before it was shipped from the factory.
