21
Chapter 2 Installation / Connection
4.
If an image does not appear, switch the input signal.
Procedure
1. Press .
The connector name of the currently displayed signal appears at the bottom right of the screen.
2. Press
to switch signals.
3.
Press to apply the change.
DVI-1
DVI-2
RGB-2
VGA
CVBS
(Autoadjust)
If an image does not appear even after switching input signals, refer to “4-1. No Picture” (page 30).
5.
Adjust the brightness.
Adjust the brightness of the screen to suit the installation environment and/or personal preference.
Adjustable Range
0 to 100
English
