39
Chapter6Reference
●
To switch among input signals
The input signal switches each time
is pressed.
When the signal is switched, the active input port name appears at the top right corner of the screen.
Note
• You can skip a specific input signal. For more information, see
“3-9. To Disable Input Signal “Input Skip”” (page 28)
.
●
To set input signal selection “Input Selection”
Setting
Function
Auto
ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically
displaysanothersignal.
Manual
ThemonitordetectsonlythePC’ssignalscurrentlydisplayingautomatically.Selectan
activeinputsignalwith
.
Procedure
1. Choose “Tools” from the Adjustment menu, and press
.
2. Choose “Input Selection” from “Tools”, and press
.
3. Select “Auto” or “Manual” with or .
4. Press
to exit.
Note
• When “Auto” is selected for “Input Selection”, the monitor’s power saving function works only when all PCs are in
the power saving mode.
