21
Chapter 3 Connecting Cables
Chapter 3 Connecting Cables
3-1 Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-D and the D-Sub
mini 15 pin connector on the back of the monitor.
Connection examples
DVI-D connector
D-sub mini
15-pin Connector
To PC 1
To PC 2
DVI-D connector
Signal cable (Digital)
FD-C39 (supplied)
D-sub mini 15-pin
Connector
Signal cable
MD-C87 (supplied)
Selecting input signal
Input Signal Selection button
Switch the input signal with
. Input signal switches each time
is pressed.
When the signal is switched, the active signal type (Analog or Digital) appears
at the top right corner of the screen for three seconds.
●
To set input signal selection [Input Signal]
Setting
Function
Auto
When PC displayed on the monitor is turned off or
enters the power-saving mode, the monitor automatically
displays signals of another PC.
Manual
The monitor does not detect the PC’s signals
automatically. Select an input signal with .
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Input Signal> from the <Others> menu, and press
.
The <Input Signal> menu appears.
(3) Select “Auto” or “Manual” with
or
, and press
.
The Input Priority setting is completed.
Note
• Power-saving function
When <Auto> is selected for <Input
Signal>, the monitor’s power-saving
function works only when the two
PCs are in the power-saving mode.
