manualshive.com logo in svg

Eizo FlexScan EV2457, User Manual

Share
Download
Eizo FlexScan EV2457 User Manual Download Page 10

 

●

Rear

13

12

10

9

11

8

16

17

18

9

14

15

7

6

6.  Handle

This handle is used for transportation.

7.  Security lock slot

Complies with Kensington’s MicroSaver security system.

8.  Lock button

Use this button to remove the monitor from the stand.

9.  USB downstream 

port

Connects to a peripheral USB device.

Note

 •

When connecting (linking together) three or more monitors in a daisy chain 
connection using the USB hub function, use the bottom USB downstream port.

10.  Headphone jack

Connects to headphones.

11.  Stereo mini jack

If you connect an external device using the stereo mini jack cable, external audio 
can be output from the monitor.

12.  Cable holder

Holds the monitor cables.

13.  Stand

*1

Adjusts the height and angle (tilt and swivel) of the monitor.

14.  Main power switch

Turns the main power on or off.  : On,   : Off

15.  Power connector

Connects the power cord.

16.  Input signal 

connectors

The following connectors are available on the monitor rear in order of left to right.
DVI connector
HDMI connector
DisplayPort connector

17.  DisplayPort output 

connector

When connecting DisplayPorts in a daisy chain connection, this connects to the 
DisplayPort input connectors of the other monitors in the configuration. When 
making a connection, it is necessary to change the version of the DisplayPort on 
the monitor outputting the DisplayPort signal from Version 1.1 (the default setting) 
to Version 1.2 (refer to 

“DisplayPort” (page 27)

).

18.  USB upstream port

Connect the USB cable when using software that requires USB connection or when 
using the USB hub function.

*1  An optional arm (or optional stand) can be attached by removing the stand section.

10

Chapter 1 Introduction

Summary of Contents for FlexScan EV2457












































Reviews:

No comments

Brands by name

Popular brands

Load more brands