29
Chapter6Reference
●
To set input signal selection
Setting
Function
Auto
ThemonitorrecognizestheconnectorthroughwhichPCsignalsareinput.
WhenaPCisturnedofforentersthepowersavingmode,themonitorautomatically
displaysanothersignal.
Manual
ThemonitordetectsonlythePC’ssignalscurrentlydisplayingautomatically.Selectthe
inputsignalfordisplayusingthe operationbutton.
Procedure
1. Choose “Monitor Settings” from the Adjustment menu, and press .
2. Choose “Input Signal” from “Monitor Settings”, and press .
3. Select “Auto” or “Manual” with or .
4. Press to exit.
Note
• If you select “Auto”, the monitor enters the power saving mode after all the PCs have entered the power saving mode or
have been switched off.
6-3. Displaying Monitor Information
This function allows you to display the model name, serial number, usage time, resolution, and input signal.
Procedure
1. Choose “Information” in the Setting menu, and press .
The “Information” menu appears.
Attention
• When you turn on the monitor for the first time, the usage time may be more than 0 due to a factory inspection.
