64
Chapter 4 Management of Network Cameras
4-7. Setting Network Camera Time
Adjust the time of the network camera to the time of this product.
Attention
• Cannot be set if the camera does not support this function.
• Can only be set when “Protocol” is “Panasonic” or “ONVIF” during camera registration.
1.
Select “
Camera Function Settings”.
The “Camera Function Settings” screen is displayed.
2.
Select a network camera to be set from “
Camera Name
”.
Information on the selected network camera is displayed.
3.
Select “
Execute
” for “
Camera Info. Display/Clock Settings”.
The clock is synchronized.
Note
• The following settings are possible when “Protocol” of the registered camera is “Panasonic”.
- Camera Information Display
- Time Display
- Display Position