10
Chapter1Introduction
1-3. EIZO LCD Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk contents
and the overview of the software programs.
●
Disk contents and software overview
The disk includes application software programs for adjustment, and User’s Manual. Refer to “Readme.txt” or
the “read me” file on the disk for software startup procedures or file access procedures.
Contents
Overview
Windows Macintosh
A“Readme.txt”or“readme”file
√
√
ColorNavigator
*1
Softwareforcalibratingmonitorcharacteristics
andgeneratingICCprofiles(forWindows)and
AppleColorSyncprofiles(forMacintosh).
(APCmustbeconnectedtothemonitorwith
thesuppliedUSBcable.)
√
√
ColorNavigatorElements
*2
Softwareforadjustingthecolorandbrightness
ofthemonitorwhilecomparingapicture
displayedonthemonitorwithaprintedpicture.
(APCmustbeconnectedtothemonitorwith
thesuppliedUSBcable.)
√
√
Screenadjustmentpatternfiles
*3
Usedwhenadjustingtheimageoftheanalog
signalinputmanually.IftheScreenAdjustment
UtilityisnotapplicabletoyourPC,usethis
patternfilestoadjusttheimage.
√
-
User’sManualofthismonitor(PDFfile)
√
√
*1 Only ColorNavigator Licensed models
*2 Only ColorNavigator Non-Licensed models
*3 This monitor does not support analog signal input, so these files are not used.
●
To use ColorNavigator/ColorNavigator Elements
Attention
• If “ColorNavigator License” in the monitor information screen is “Not Registered”, the ColorNavigator license must be
purchased and registered to the monitor. For the purchase of the license, contact your local EIZO representative.
• ColorNavigator Elements can be used without a license.
Refer to the corresponding User’s Manual on the CD-ROM disk in order to install and use the software.
When using this software, you will need to connect a PC to the monitor with the supplied USB cable. For
details of the USB cable connection, see
“7-3. Making Use of USB (Universal Serial Bus)” (page 44)
.
