Eizo ColorEdge CG279X, User Manual

Page: 36 / 55

36
Chapter 5 Advanced Adjustments/Settings
Function Settings Description
Off Timer Off
6h
9h
12h
15h
18h You can set the time for the monitor's power to automatically
turn off. The monitor will automatically turn off when the time
set here elapses after the monitor is turned on, or after the
monitor wakes up from Power Save.
Note
• One minute before the Off Timer function is triggered,
a message is displayed to notify you that the monitor's
power will be turned off.
• Only the power switch can be operated while this message
is displayed.
Indicator Off
1 to 7 The brightness of the power switch and the operation
switches when the screen is displayed can be set.
Beep On
Off You can set the beep that sounds each time a switch is
operated.
Input Skip Skip
- This function allows skipping of input signals that will not be
used when the input signals are switched.
Note
• Not all input signals can be set to "Skip".
Mode Skip Skip
- This function allows skipping of modes that will not be used
when selecting modes. Please use this function if display
modes are limited, or if you want to prevent randomly
changing the display status.
Note
• Not all modes can be set to "Skip".
Custom
Key [F1]
[F2] Off
Input Range
BT.709 Gamut Warning
Luminance Warning
Safe Area Marker
Aspect Marker
Prev. Color Mode
Information
PQ / HLG Clipping You can set the function that is assigned to the [F1] or [F2]
switch.
Note
• By default, the [F1] switch is set to the "Information"
function and the [F2] switch is set to "Off".
• Regarding the custom keys, see "Chapter 4 Custom Key
Settings" (page 20) .
USB
Selection DVI
HDMI
DisplayPort
USB-C USB-1 (USB-C)
USB-2 When two PCs are connected to one monitor, you can link
the input signal with the USB upstream port. After linking,
the USB ports will automatically switch when the input
signals switch. When you calibrate one monitor from two
PCs, it is not necessary to switch USB cables. It is also
possible to connect USB devices such as a mouse or
keyboard to the monitor and use them from two PCs.
The default settings may differ depending on the input
signal.
Input signal Default setting
DVI, HDMI, DisplayPort USB-2
USB-C USB-1 (USB-C)
Note
• When you want to change settings and there is a storage
device such as USB memory connected to the monitor,
change settings only after you have removed the storage
device. In failing to do so, data may be lost or damaged.
• You cannot change the keyboard layout.
• The USB downstream port works with the PC that is
currently being displayed.