manualshive.com logo in svg

Eizo ColorEdge CG211, User Manual

Share
Download
Eizo ColorEdge CG211 User Manual Download Page 32

Color Adjustment of the Mode Settings

<Brightness>, <Temperature> and <Gamma> settings can be adjusted on the 
FineContrast menu. Select the desired function icon with the Up/Down Control buttons 
and adjust with the Left/Right Control buttons. (Setting(s) of <Temperature> and/or 
<Gamma> is defined as standard default in some modes.

 

Detailed Adjustments

The detailed color settings of each mode can be adjusted by using the <Color> menu 
of the ScreenManager.

 

* "CAL" mode can be adjusted only by Calibration Software "ColorNavigator".

Adjustment Lock

Use the "Adjustment Lock" function to prevent any accidental changes.

Locked function

●

     

Settings in the ScreenManager

 

●

     

Auto Adjustment Button 

Unlocked function

●

     

Selecting of the FineContrast mode by the Right or Left 
buttons, / Adjustments

 

●

     

<Brightness> setting by the Up or Down buttons.

 

●

     

Input Signal Selection Button

 

●

     

Power Button

 

[To lock]

Switch off the monitor's power by the power button on the front control panel. Press on 
the Auto Adjustment button while switching on the monitor's power.

Summary of Contents for ColorEdge CG211








































































Reviews:

No comments

Brands by name

Popular brands

Load more brands