Page 3 of 12
Drawing : - TPC433
Issue
: - 2
Date
: - 24/11/16
INTRODUCTION
Designed for a wide range of applications, the RM85 is a rugged, industrial
unit, which utilizes an energy-efficient compressor and a compact portable
design to provide easy efficient drying.
The RM85H has a number of special features:
•
High efficiency rotary compressor
•
EIPL’s “
Hot Gas
” defrost system
•
Digital Humidity Control
•
Integral pump out system
•
Provision for permanent drainage
•
Extra long power cord
•
Robust rotational moulded polyethylene housing
•
Separate outlets allowing dry air to be ducted
The fan draws the moist air through the cold evaporator coil, which cools the
air below its dew point. Moisture forms on the evaporator coil and is collected
in the condensate tray, which is equipped with a permanent drain. The cooled
air then passes through the hot condenser coil where it is reheated using the
same energy removed during the cooling phase, plus the additional heat
generated by the compressor. The air is, therefore, discharged from the
dehumidifier at a slightly higher temperature with a lower absolute humidity
than that which entered. Continuous circulation of air through the
dehumidifier gradually reduces the relative humidity within the area.
The RM85 dehumidifier is a rugged, reliable drying unit designed to operate
effectively over a broad range of temperature and humidity conditions. An
active hot gas defrost system, controlled by an electronic timer, guarantees
positive de-icing, thereby optimizing operation at low temperatures.
A digital Humidistat is included which allows for precise humidity control. A
programmable display lets you set a specific desired humidity level.
The unit incorporates a rotational moulded polyethylene shell resilient to
damage caused by rough handling.
