1
The CPS Pulse Keys
You will use your CPS Pulse clicker as you do your
other handheld devices that have keypads. Key touch
-
es are described here as
presses
. Several keys have
two types of key presses –
press
and
press and hold
.
Left Navigation
Right Navigation
Enter/Send
Backspace
Alpha/Numeric/SMS Entry
Plus/Minus
Symbols Table
. Period
, Comma
/ Division
* Multiplication
+ Plus
- Minus
Space
( Open Parenthesis
) Close Parenthesis
x
y
= Equal
> Greater than
< Less than
≥ Greater than or equal
≤ Less than or equal
| Pipe
√ Square Root
^ Caret
@ Email
Jump/Search
Press
key to
jump
to a question
in a self-paced test or homework
assignment.
Press and hold
key to search for
the next unanswered question.
Symbol
Press
key multiple times to cycle
through Symbols Table.
Power
Press
to power on
your CPS Pulse.
Press and hold
for
2 seconds to power
down your CPS Pulse.
Switch text entry mode
Press
key multiple times to cycle
through the text entry modes.
As you change modes, they are
pictured on the Screen.
The Screen
Channel #
Correct/
Incorrect
Up arrow flashes for each transmit,
down arrow flashes for each receive.
RF Activity
Indicators
Indicates which of the text entry modes -
alpha, numeric, SMS - is currently in use.
Text Entry
Mode
Indicates that the keypad is operating in
Self-Paced Mode.
Self-Paced
Mode
Indicates the current battery voltage from full
to low to very low. Very low will flash.
Battery
Status
Indicates correct or incorrect answer.
Teacher must activate this option.
NAME
DESCRIPTION
ICON
Displays Channel # or homework bin,
depending on mode.
Enter/Send Animated during transmission.
OK
when transmission acknowledged.
Menu
Press
to access the Main Menu.
Press
the
Navigation
keys to scroll the Menu.
Press
the
Enter
key to select a Menu item.
Menu Item
Description
Channel
Displays the Channel # in the
upper left corner of the Screen.
Contrast
Press the
Navigation
keys to
adjust the contrast from low
contrast (1) to high contrast (6).
Greeting
The Greeting displays when you
turn on the Pulse.
Press the
Enter
key, type your
greeting, press the
Enter
key
again to save it.
Diagnostic Displays the Pulse’s Serial num
-
ber, your Pulse type, the signal
strength, and firmware version.
Join
Press the
Enter
key.
Type the
Join Code
for the Class.
Clicker #
Displays the clicker’s assigned
number.
