GB
15
factors. The following risks may arise due to the
machineʼs design and setup:
n
Contact with the saw blade in the uncovered saw
zone.
n
Reaching into the running saw blade (cut
injuries).
n
Kick-back of workpieces and parts of
workpieces.
n
Saw blade fracturing.
n
Catapulting of faulty carbide tips from the saw
blade.
n
Damage to hearing if essential ear-muffs are not
worn.
n
Harmful emissions of wood dust when the
machine is used in closed rooms.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
AC motor
230V ~ 50 Hz
Power
1200 W
Operating mode
S1
Idling speed n
0
4,500 rpm
Carbide saw blade
ø 210 x ø 30 x 2.5 mm
Number of teeth
24
Extractor socket
Diameter 35 mm
Base area
400 x 325 mm
Weight
10 kg
For use as a bench-type saw:
Saw bench
360 x 250 mm
Cutting depth
0 - 33 mm
Parallel stop
Can be pivoted from -30° to + 30°
For use as a crosscut saw:
Swiveling range
-45° / 0° / +45°
Miter cut
0° to 45° to the left
Saw width at 90°
120 x 55 mm
Saw width at 45°
65 x 55 mm
Saw width at 2 x 45° (double miter cut)
40 x 23 mm
Sound and vibration
Sound and vibration values were measured in
accordance with EN 61029.
L
pA
sound pressure level
99 dB(A)
K
pA
uncertainty 3
dB
L
WA
sound power level
112 dB(A)
K
WA
uncertainty 3
dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 61029.
Vibration emission value a
h
= 2,162 m/s
2
K uncertainty = 1,5 m/s
2
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
The specified vibration value can be used to compare
the equipment with other electric power tools.
The specified vibration value can be used for initial
assessment of a harmful effect.
Keep the noise emissions and vibrations to a
minimum.
n
Only use appliances which are in perfect working
order.
n
Service and clean the appliance regularly.
n
Adapt your working style to suit the appliance.
n
Do not overload the appliance.
n
Have the appliance serviced whenever
necessary.
n
Switch the appliance off when it is not in use.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain residual
risks cannot be rules out. The following hazards
may arise in connection with the equipment’s
construction and layout:
1. Lung damage if no suitable protective dust mask
is used.
2. Damage to hearing if no suitable ear protection is
used.
3. Health damage caused by hand-arm vibrations if
Anleitung_TH_MS_2112_T_SPK1__ 03.05.13 07:58 Seite 15
